Material : Metal, Plastic
Color : Black, Silver Tone
Overall Length(approx.): 210mm
Cutter diameter: 50mm
Wood Saw Diameter: 30mm
Metal Cutting Diameter: 25mm
Connecting Shaft: 8mm
Minimum cutting thickness:
Steel Plate: ?1.2mm
Stainless Steel: ?1mm
Wood / plastic fiberboard / plexiglass / plywood: ?5mm (3000rpm or 1m/min)
Iron / Copper: ?5mm (300rpm or 0.05m/min)
Sawn timber, plastic, plywood and other non-metallic materials??20mm (3000rpm or 1m/min)
1 x Iron box
1 x Machine tool
1 x Cutter holder
1 x Paired with a knife rod
1 x HEXAGON WRENCH
1 x Plastic handle
1 x Bracket Handle connecting rod
1 x saw1 x User manual
1.Never start your drill before you run your drill.
2. stop your work and release the cutting bit or saw blade while your drill is still running.
3. use some proper cutting or sawing oil before you start to use the tool.
4. Excellent cutting speed by 2 metre per minute with 3000RPM. Best Cutting result without any burrs at the cutting edges 360° changeable direction at operation.
By replacing another rod holder, you can cut 5mm max. of plastic plate, fibre plate, perspex and plywood.
5. To saw woods, plastic, some other non-metal materials of 50mm max. thickness at a general speed of 1M per minute with RPM 3000 max. RPM may vary with the different teeth of saw blade.
6. To saw metal, copper and other similar material of 20mm max. thickness at a speed of 0.05M per minute with RPM 300max. RPM may vary as per different teeth of your saw blade.
7.Please allow minor error due to manual measurement.
8.Due to the difference between different monitors, the picture may not reflect the actual color of the item.
It is widely used for cutting or sawing metal sheet, ,metal rods&slices, plastic, fiberglass, woods.A must tool in your jobs of repairing, decoration and some other similar purpose.
Portable and convenient, excellent in cutting and sawing without any nurrs.
Changable in any cutting sawing direction within 360°.Available in cutting and sawing any curve, straight, round, square, oval and any other inregullar shapes.
Close the plastic safety housing before usage.Don't exceed the thickness of cutting materials stipulated herein.
Don't use this tool out of the usage ranges illustrated herein.Switch off your drill before you install the tool or have any cutting rod and saw blade replacements.