Ribbed Plastic Anchor Kit with Screws and Masonry Drill Bit (#10-12 x 1")

Price: $12.99 $10.99
Product prices and availability are accurate as of 2019-09-29 18:48:47 EDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
You Save: $2.00 (15%)
Usually ships in 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Kit Includes: 100 #10-12 x 1" Plastic anchors, 100 #10 x 1-1/4'' Screws, One 1/4'' x 4'' Masonry Drill Bit & Plastic Case


These plastic anchors are intended for light duty anchoring applications and offer extra support for loads.

The split in the ribbed anchors expand on two opposing sides as you tighten the screw.

Ribs prevent the anchor from turning in the hole during installation.

The split in the anchor ensures three way expansion on sides for increased holding power.

Once installed, they provide a flush, clean appearance in drywall.

The anchor's fins prevent the anchor from turning in the hole during and after installation.

The split in the anchor ensures three way expansion on sides for increased holding power.

Used with sheet metal, wood and lag screws in hollow walls.

Can be used in light masonry or masonry block applications.

Requires a pre-drilled hole for installation.

Installing anchors correctly is key to a strong hold that lasts.

Product Features

These plastic anchors are intended for light duty anchoring applications and offer extra support The split in the ribbed anchors expand on two opposing sides as you tighten the screw Ribs prevent the anchor from turning in the hole during installation The split in the anchor ensures three way expansion on sides for increased holding power Kit Includes: 100 #10-12 x 1" Plastic anchors, 100 #10 x 1-1/4'' Screws, One 1/4'' x 4'' Drill Bit

Write a Review