How To install Unplug the lamp first. Lamp cord wire is two wires sheathed in rubbery plastic side by side. The sheathing can be cut carefully down the middle & the 2 sheahted wires can be pulled apart. Or you can cut one of the sheathed wires with nippers & then pull the wires apart. Once cut & separated, ~1/4" is stripped on both ends of the cut wire. The other sheathed wire is left alone & is not cut. The cut & stripped wirres go into little jaws on each side of the switch in the middle. The jaws are screwed down to hold the wires. Tightening the screws takes 3 hands & is the only tricky part. The other sheathed wire goes in one side, around the middle of the switch & out the other side. It is held down on both sides by screwed down "hold downs". A spring goes in the middle, then the big button, then the outer shell holds it all together. Now plug in the lamp. Stepping on the button connects the 2 cut & stripped wires to complete the circuit, electricity flows though the wire & the lamp lights up
Product Name : Floor Lamp Switch;Voltage/Current : 1A 250VAC / 2A 125VAC
It is ideal for light-duty industrial, medical, office, and many other applications.
It can be operated by foot or hand.
Works with Both SPT1 Wire & SPT2 Wire
Perfect Use For bedside lamp on night stand.