Lomanco replacement motor, suitable for use with: power vent, 3.4 a, 1/10 hp, 1100 RPM, 120 V. A universal mounting hardware kit comes in the box with each motor to replace older models. Do not attempt to buy a new unit and pull the motor out, the mounting has changed. The Conduit (flexible cable) can be used from your previous motor simply by un-screwing it and putting it on your new motor. Lomanco motor comes with universal mounting kit to replace the flat plate (with 3 mounting holes). lomanco motor does not have the flat plate sandwiched in between motor laminations. If your motor mounts with a belly band around the motor (5" diameter motor), this motor should work fine. If you need a longer shaft take a look at motor #PD144, it has a 4" long shaft with similar mounting characteristics. Replacement Fan blade # 14393 available. 1 year manufacture warranty.
3.4 amps @ 115 Volts 60hz
5" Diameter Motor - Shaft: 1/2" Diameter x 1.75" with Flat on Shaft
Motor Length 2 1/4" without shaft
CW rotation facing the shaft