A&H Abrasives 119549, Sanding Sheets, Silicon Carbide, Waterproof, 3x4 Micro Mesh 12000 Grit, 5 Each

Price: $13.79
Product prices and availability are accurate as of 2019-04-10 04:54:05 EDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Usually ships in 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Ultra fine finish with micro mesh. Use Micro-Mesh finish abrasive to bring paint and polyester finishes or wood and plastic surfaces to an extremely high gloss (hand application only). Cosistantly graded crystal abrasive with an inner cushioning layer on super flexable cloth backing ensure only the finest "see through" finish. To use, smooth workpiece with conventional sandpaper, then wet sand with increasingly finer Micro-Mesh grit to remove even the smallest imperfections. These sheets clean up with water, allowing their use up to 15 times longer than standard abrasives. Can also be used to polish and restore "smoked or scratched plastic lenses to optical clarity.

Product Features

Specifications: Width=3 in, Length=4 in, Grit=12000 Specifications: Abrasive=SILICON CARBIDE, Abrasive Bond=PHENOLIC RESIN, Backing=CLOTH Specifications: Backing Weight=J, Treatment=WET/DRY

Write a Review